Download Windows patches with Windows Hotfix Downloader

Martin Brinkmann
May 27, 2013
Windows, Windows Updates
|
20

If you do not want to or can use Windows Update to keep your operating system up to date, you have a couple of alternatives at your disposal. We covered most of them in our extensive Windows Update guide. There are two basic options that you have: you can either download patches directly from Microsoft's Download Center or use a third party application to do just that.

Third party software is usually the better way unless you only want to download a couple of patches for the operating system. If you want to download them all, for instance to burn them to DVD so that you can install those patches on a system without permanent Internet connection, then third party software is the way to go.

Why? Because it is a lot faster and less error prone. Most programs offer to download all patches released for Windows automatically from Microsoft which is a lot faster than having to find and download the patches manually instead.

Windows Hotfix Downloader is one of the easier to use programs for the job. All you have to do is select the operating system or Office version that you want to download patches for and pick a local download directory before you hit the download button.

windows hotfix downloader

The program will download all selected patches and hotfixes to the download location on your system. Updates are not selected by default and it is up to you to select them. You can use the checkboxes for that or right-click to select all at once using the context menu.

The program displays update names, sizes and release dates in the interface.  Downloads may take a while depending on that selection and the speed of your Internet connection. Windows Hotfix Downloader displays the download progress directly in the program interface.

You can hit the pause button at anytime to stop the process, and resume to start downloads from the position you did so. Note that you cannot stop the download process once it is started from within the program interface.

The application verifies all downloaded updates once they have been all downloaded to make sure that files are not corrupt.

Notes: The program can only download 32-bit or 64-bit updates for Windows 7 or Windows 8, or 32-bit and 64-bit updates for Office 2010 or 2013. It requires the Microsoft .Net. Framework 4.0.

You can install all updates individually from the folder they have been downloaded to, or directly from within the application by selecting an update mode first, and then the updates that you want to install.

Verdict

If you need to download all or many updates that Microsoft released for Windows 7 or Windows 8, or the two latest Office versions, then this program can help you with that with minimal effort on your side. The update installer needs some work done though as it is not as intuitive as it could be. It would for instance be helpful if the program would come with an option to only download or install updates that have not been installed yet on the system to make things easier for the user of it.

Advertisement

Tutorials & Tips


Previous Post: «
Next Post: «

Comments

  1. ijere said on June 12, 2013 at 6:12 am
    Reply

    Pls how sure are guys are cos my PC is given me alot of problem.

  2. Jeffrey Morrison said on May 29, 2013 at 11:48 am
    Reply

    Please indicate if this Hotfix Downloader can and will download updates, patches, etc., for foreign language versions of Windows 7 (my Windows is a Spanish version) or if only for English. I open it up and see a list of 520 updates, what happens if I download and install them on my Spanish language OS?

    1. Martin Brinkmann said on May 29, 2013 at 12:00 pm
      Reply

      It is only downloading English updates as far as I know.

  3. X said on May 28, 2013 at 10:03 am
    Reply
    1. Rick said on May 28, 2013 at 2:33 pm
      Reply

      The problem wasn’t in the rollup but was in the May updates and only seems to effect folks that have gone to town “customizing”.

      I have run the rollup on win7x86, win7x64, windows servers 2008 (all editions), sharepoint server etc (through VM clean installs of the OS) and none have shown the issue reported at your link and others popping up around the net.

      So I guess it’s worth repeating … Always backup before updating or installing any significant software just in case …

      1. Rick said on May 28, 2013 at 2:36 pm
        Reply

        Edit on that one … the problem seems to be reported in both the rollup and in the May updates … sorry about that.

  4. Julia said on May 28, 2013 at 3:23 am
    Reply

    Thanks for the answers!

  5. Dukislav said on May 28, 2013 at 3:11 am
    Reply

    You must bear in mind that this is a list of official and “unofficial” updates (McRip list & repository). Whatever the “unofficial” means …

  6. Rick said on May 28, 2013 at 12:00 am
    Reply

    Yes it is correct that there is a hotfix rollup download. No – it is not an “ultimate” – you cannot consider this SP2.

    The total rollup download is around 32M – full windows updates can range from 300-600M depending on what you have installed (re framework etc) so clearly msft only included certain updates.

  7. Julia said on May 27, 2013 at 6:19 pm
    Reply

    Martin, I’ve read this
    “As a part of Patch Tuesday program, Microsoft has released an ultimate collection of hotfixes and updates for Windows 7 SP1 and Server 2008 R2 SP1. Its a single pack which contains 90 hotfixes focused on performance and stability which were released after Service Pack 1 (SP1) so you can consider it as Service Pack 2 (kind of) for Windows 7 and Server 2008 R2. Basically these hotfixes improve overall performance and system reliability of Windows 7 and Windows Server 2008 R2 based computer system.”

    here: http://www.askvg.com/waiting-to-download-service-pack-2-sp2-for-windows-7-and-server-2008-r2/?utm_source=feedly&utm_medium=feed&utm_campaign=Feed%3A+AskVG+%28AskVG%29

    Can you tell me if that is correct, please?

    1. Martin Brinkmann said on May 28, 2013 at 1:41 am
      Reply

      Sounds a lot like this enterprise hotfix rollup.

      http://blogs.msdn.com/b/dougste/archive/2013/03/13/hotfix-rollup-for-windows-7-sp1-and-windows-server-2008-r2-sp1.aspx

      I have not taken a look at the AskVG article so can’t say it if it the same.

    2. ilev said on May 28, 2013 at 12:14 am
      Reply

      These updates are intended for Enterprise.

  8. Paul(us) said on May 27, 2013 at 4:29 pm
    Reply

    This is a handy program when you know what your system needs.
    I cant determinate from the article or this program automatically helps you to separate which update’s you need, hardware wise speaking?

    Does this program works just like the Windows update program which determinate automatically which hardware update it needs. I ask this so I do not download and install programs (lets say intel and amd updates) which I do not need, white a change that main system is not working anymore after the updates.

    1. Martin Brinkmann said on May 27, 2013 at 4:41 pm
      Reply

      Paulus it is not distinguishing between updates that you have already installed and new updates.

  9. Rick said on May 27, 2013 at 2:44 pm
    Reply

    An alternative update downloader can be found at wsusoffline.net

    Batch update is included in this app without the need to manually create a batch file.

    1. Martin Brinkmann said on May 27, 2013 at 2:54 pm
      Reply

      That’s a great program. Here is my latest review of it: https://www.ghacks.net/2013/01/03/windows-offline-update-8-0-released/

  10. Niks said on May 27, 2013 at 1:34 pm
    Reply

    Any way to batch install all updates ?

    1. Anon said on May 27, 2013 at 2:21 pm
      Reply

      For the *.MSU files you can put the following line in a batch file.
      for %%a in (*.msu) do START /WAIT %%a /quiet /norestart

    2. Martin Brinkmann said on May 27, 2013 at 1:54 pm
      Reply

      I think you can via the install options even though it would not work on my system. My guess is that the program checks if selected updates are installed already so that they are not installed a second time. Can’t confirm that though.

Leave a Reply

Check the box to consent to your data being stored in line with the guidelines set out in our privacy policy

We love comments and welcome thoughtful and civilized discussion. Rudeness and personal attacks will not be tolerated. Please stay on-topic.
Please note that your comment may not appear immediately after you post it.